How to Repair Small Holes in Drywall in Half an Hour


Before you attempt to repair small holes in drywall, you should understand that the whole process takes about an hour. However, if you have experience and know the proper tools and methods, you can quickly and easily fix small holes. You can do this job in as little as half an hour.

Mesh joint tape

Using mesh joint tape to repair small holes in drywall is an easy yet effective solution. The tape holds the patch in place while applying the drywall compound. To get the best results, apply a thin coat of joint compound over the patch, feathering it out a few inches around the perimeter. Next, sand the patch with a sanding sponge. Repeat the process as necessary to ensure a smooth, even finish. If you want a more durable finish, apply another layer of compound. Once the compound has dried, sand again and repeat the process. Eventually, you can repaint your patch.

The first step in repairing a small hole in drywall is to measure the hole. Next, ensure the tape extends two inches on either side of the hole. Then, lay the tape in a crisscross pattern over the hole. Once the tape is placed on both sides of the hole, press down firmly to secure it.


If your walls have small holes, there are several simple ways to patch them up. The first option is to use a a joint compound and a putty knife to patch the drywall. After the compound has cured, sand the area smoothly and apply primer. The second option involves patching larger holes.

First, locate the holes. Some drywall dings are challenging to see. If you can locate the small holes at once, you can fix many minor dings with one step. You can then use a putty knife to apply the spackle. Be sure to use fine-grit sandpaper to smooth the patch.

The next step is to paint the repaired wall. Depending on the hole size, you may not need to cover the entire hole. However, you must paint the entire surface if the hole is on a colored wall. The technique for painting a small hole is similar to that of a giant hole.

Repainting a wall after repairing a hole in drywall

Repainting a wall after a small hole in drywall doesn’t have to be complicated. The hole may be relatively small and can be hidden using a simple wall patch. Before painting the patch, you should apply primer to the surface. This will prevent the paint from penetrating the patch and make it easier to blend. Next, sand the patch to remove any bumps or ridges. You’ll also need to select the type of paint you plan to use.

If you’re repairing the wall with drywall compound, you should make sure to apply it evenly around the hole. Then, use a putty knife to smooth out the filler. Once the filler dries, you can paint the wall and other surfaces. Before painting, you must ensure you have removed all dust and traces of the joint compound.

If you’re using nails to repair the hole, you can remove them from the wall. First, scrape off the damaged surface to expose the nail. Next, push the screw back into the drywall. After doing this, use a high-quality primer to seal the joint compound. This will prevent the paint from absorbing the filler.